iOS Vs Android

- 41studio
- September 9, 2014
- Uncategorized

iOS Vs Android

Which Platform Should I Choose For The Initial Release?

Nowadays, Internet is one of the important elements of the business. And according to internetlivestat.com, about 40% of the world population have an i…

High-Speed Rails Deploys With Git

October 2, 2013

TL;DR — We reduced deploy times from ten minutes to less than five seconds by replacing the standard Capistrano deploy tasks with a simpler, Git-based workflow and avoiding slow, unnecessary work.

At Code Climate, we try to minimize the time between when code is written and when it is live in production. When deploys slowed until they left enough time to make a pot of coffee, we invested in speeding them up.

What’s in a deploy?

At its core, deploying a modern Rails application consists of a few simple steps:

Update the application code
Run bundle install (if the Gemfile was updated)
Precompile assets (if assets were updated)
Restart the application processes (e.g. Unicorn)

If the deploy fails, the developer needs to be alerted immediately. If application processes fail to rollover to the latest code, we need to detect that.

For kicks, I wrote a Bash script to perform those steps, to determine our theoretical lowest deploy time (just the time for SSH and running the minimum, required commands). It took about three seconds when there were no Gemfile or asset changes. So I set out to reduce our ten minute deploys to as close to that number as possible.

Enter Capistrano

If you take anything away from this article, make it this: Capistrano is really two tools in one. It provides both:

A runtime allowing you to run arbitrary commands against sets of remote servers via SSH
A set of default tasks for deploying Rails applications

The runtime is incredibly useful. The default tasks, which originated back in 2005, come from a pre-Git era and are unnecessarily slow and complex for most Rails applications today.

By default, Capistrano creates a releases directory to store each deployed version of the code, and implicitly serve as a deployment history for rollback. The current symlink points to the active version of the code. For files that need to be shared across deployments (e.g. logs and PID files), Capistrano creates symlinks into the shared directory.

Git for faster, simpler deploys

We avoid the complexity of the releases, current and shared directories, and the slowness of copying our application code on every deploy by using Git. To begin, we clone our Git repo into what will become our deploy_to directory (in Capistrano speak):

git clone ssh://github.com/codeclimate/codeclimate.git /data/codeclimate/app

To update the code, a simplegit fetch followed by git reset —hard will suffice. Local Git tags (on the app servers) work beautifully for tracking the deployment history that the releases directory did. Because the same checkout is used across deployments, there’s no need for shared symlinks. As a bonus, we use Git history to detect whether post-update work like bundling Gems needs to be done (more on that later).

The Results

Our new deploy process is heavily inspired by (read: stolen from) Recap, a fantastic set of modern Capistrano tasks intended to replace the defaults. We would have used Recap directly, but it only works on Ubuntu right now.

In the end we extracted a small set of Capistrano tasks that work together to give us the simple, extremely fast deploys:

deploy:update_code — Resets the Git working directory to the latest code we want to deploy.
bundle:install:if_changed — Checks if either the Gemfile or Gemfile.lock were changed, and if so invokes the bundle:install task. Most deploys don’t include Gemfile changes so this saves some time.
assets:precompile:if_changed — Similar to the above, this invokes the assets:precompile task if and only if there were changes that may necessitate asset updates. We look for changes to three paths: app/assets, Gemfile.lock, and config. Asset pre-compilation is notoriously slow, and this saves us a lot of time when pushing out changes that only touch Ruby code or configuration.
deploy:tag — Creates a Git tag on the app server for the release. We never push these tags upstream to GitHub.
deploy:restart — This part varies depending on your application server of choice. For us, we use God to send a USR2 signal to our Unicorn master process.
deploy:verify — This is the most complex part. The simplest approach would have Capistrano wait until the Unicorn processes reboot (with a timeout). However, since Unicorn reboots take 30 seconds, I didn’t want to wait all that extra time just to confirm something that works 99% of the time. Using every ounce of Unix-fu I could muster, I cobbled together a solution using the at utility:

echo 'curl -sS http://127.0.0.1:3000/system/revision | grep "c7fe01a813" > /dev/null || echo "Expected SHA: c7fe01a813" | mail -s "Unicorn restart failed" ops@example.com' | at now + 2 minutes

Here’s where we ended up: (Note: I edited the output a bit for clarity.)

$ time cap deploy
  * executing `deploy'
 ** transaction: start
  * executing `deploy:update_code'
  * executing "cd /data/codeclimate/app && git fetch origin && git reset --hard origin/master"
    command finished in 714ms
  * executing `bundle:install:if_changed'
  * executing `assets:precompile:if_changed'
  * executing `deploy:tag'
  * executing "cd /data/codeclimate/app && git tag 20130930041400 -m 'Deployed at 2013-09-30 00:13:58 -0400'"
    command finished in 199ms
 ** transaction: commit
  * executing `deploy:restart'
  * executing "rvmsudo god restart unicorn"
    command finished in 1867ms
  * executing `deploy:verify'
    command finished in 216ms

real  0m5.314s
user  0m1.022s
sys 0m0.366s

If your deploys are not as zippy as you’d like, consider if a similar approach would work for you. The entire project took me about a day of upfront work, but it pays dividends each and every time we deploy.

The Ruby Rails Aggregator